Menu

PROJECTS

GARRARD HOUSE

Client: Michael J Lonsdale

Architects: Wilkinson Eyre

Building Services Consultants: Waterman

Value to CAD SERVICES: £205,000

Revit 2019 using Fabrication CADmep parts

View project
Garrard House

BATTERSEA
PHASE 2
SWITCH HOUSE EAST

Client: Imtech Engineering

Architect: Wilkinson Eyre

Building Services Consultants: Chapman & BDSP

Value to CAD SERVICES: £322,000

Revit 2018 using Fabrication CADmep parts

View project

RIVERSIDE LEISURE
CENTRE

Client: Munro

Architects: Pick Everard

Building Services Consultants: Pick Everard

Value to CAD SERVICES: £75,000

Revit 2018 using Fabrication CADmep parts

View project
Riverside Leisure Centre

BATTERSEA
PHASE 2

Client: Michael J Lonsdale

Architect: Wilkinson Eyre

Building Services Consultants: Chapman & BDSP

Value to CAD SERVICES: £575,000

Revit 2018 using Fabrication CADmep parts

View project

UCLH PHASE 5

Client: Dornan

Architect: BMJ Architects

Building Services Consultants: ARUP

Value to CAD SERVICES: £260,000

Revit 2018 using Fabrication CADmep parts

View project

LONDON DEVELOPMENT PROJECT

Client: Michael J Lonsdale

Building Services Consultants: Chapman & WSP

Value to CAD SERVICES: £600,000

Fabrication CADmep 2018

View project

PLOT C BBC TELEVISION CENTRE

Client: Imtech Engineering

Architect: Allford Hall Monaghan Morris

Building Services Consultants: ARUP

Value to CAD SERVICES: £278,000

Fabrication CADmep 2017

View project
Wembley NW07/NW08

WEMBLEY NW07/NW08

Client: Wates Construction

Architect: Flanagan Lawrence

Building Services Consultants: Desco

Value to CAD SERVICES: £238,000

Fabrication CADmep 2017

View project

BART'S SQUARE PHASE 1

Client: SES Engineering

Architect: Sheppard Robson

Building Services Consultants: MTT

Value to CAD SERVICES: £333,000

Fabrication CADmep 2018

View project
Barts Square Phase 1
footer logos
Facebook Twitter Linkedin

CAD SERVICES is an ISO9001 Registered company. Copyright © 2019 CAD SERVICES. All rights reserved 

This website uses cookies to improve your experience. We'll assume you accept this policy as long as you are using this websiteAcceptView Policy

GARRARD HOUSE

  • Client: Michael J Lonsdale

  • Architects: Wilkson Eyre

  • Building Services Consultants: Waterman

  • Value to CAD SERVICES: £205,000

  • Revit 2019 using Fabrication CADmep parts

Garrard House was a Shell & Core and Fit Out, consisting of 2 Basement Plant Areas, Ground Floor Reception, Office and Retail (Retail by others) typical floors levels 01 to 06 then levels 07 to 09 and Roof Plant.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and acted as the initial point of contact between ourselves and MJL. We attended co-ordination meetings and provided clash detection reports for proof of QA and clash checks of CSD Models. CAD Services produced MEP coordinated drawings, Single Service drawings for Ventilation, Pipework, Drainage and Rainwater and Containment, Schematics and Builders work drawings.

BATTERSEA PHASE 2 SWITCH HOUSE EAST

  • Client: Imtech Engineering

  • Architects: Wilkson Eyre

  • Building Services Consultants: Chapman & BDSP

  • Value to CAD SERVICES: £322,000

  • Revit 2018 using Fabrication CADmep parts

Battersea Phase 2 is a mixed use development that sits upon the existing site of the old Battersea Power Station. This element of works was for MEP Services Switch Hall East High End Residential.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and acted as the initial point of contact between ourselves and Imtech. We  attended weekly co-ordination meetings. CAD Services produced Single Service drawings for Pipework, Ventilation, Containment, Drainage and Rainwater, Schematics and Builders work drawings for Landlord areas. The development of the BIM model for services utilised Revit 2018 with Fabrication parts.

RIVERSIDE LEISURE CENTRE

  • Client: Munro

  • Architects: Pick Everard

  • Building Services Consultants: Pick Everard

  • Value to CAD SERVICES: £75,000

  • Revit 2018 using Fabrication CADmep parts

Riverside Ice and Leisure Centre Project consisted of a new Pool building that had Basement Plant, Ground, First and Roof Plant and alterations to existing Ice Rink Ground & First Floors.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and acted as the initial point of contact between ourselves and Munro. CAD Services provided clash detection reports for proof of QA and clash checks of CSD Models as lead co-ordinator. CAD Services produced MEP co-ordinated drawings, Single Service drawings for Mechanical, Electrical & Public Health Services and Builders work models utilising the existing Revit model produced by the services consultant.
The development of the existing Pick Everard model for services was utilising Revit 2018 and CAD Fabrication MEP 2018.

BATTERSEA POWER STATION
PHASE 2

  • Client: Michael J Lonsdale

  • Architects: Wilkinson Eyre

  • Building Services Consultants: Chapman & BDSP

  • Value to CAD SERVICES: £575,000

  • Revit 2018 using Fabrication CADmep parts

Battersea Phase 2 is a mixed use development that sits upon the existing site of the old Battersea Power Station. This element of works was for the pipework services within the 3 Levels of Basement within the main Building. 

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and act as the initial point of contact between ourselves and MJL. CAD SERVICES attended weekly coordination meetings. CAD Services produced Single Service drawings for Pipework, Drainage and Rainwater, Schematics, Builders Work Models and Sheets for Builders Work.

UCLH - PHASE 5

  • Client: Dornan

  • Architects: BMJ Architects

  • Building Services Consultants: ARUP

  • Value to CAD SERVICES: £260,000

  • Revit 2018 using Fabrication CADmep parts

UCLH Phase 5 comprises of 7 Floors and 3 Basement Levels including Plant Areas and Roof Plant.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and act as the initial point of contact between ourselves and Dornan. CAD SERVICES attended fortnightly coordination meetings and provide clash detection reports for proof of QA and clash checks of CSD Models as lead co-ordinator.  CAD Services produced MEP co-ordinated drawings, Single Service drawings (at Construction stage), Schematics and Builders work drawings .

LONDON DEVELOPMENT PROJECT

  • Client: Michael J Lonsdale

  • Building Services Consultants: Chapman & WSP

  • Value to CAD SERVICES: £600,000

  • Fabrication CADmep 2018

London Development project (Fleet Building) Re-Development consisted of a new Eight Storey Mixed Use Commercial Building with Basement Plant areas, Ground Floor Retail and First to Eighth Floor Offices.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and acted as the initial point of contact between ourselves and MJL. Attended fortnightly design meetings and provided clash detection reports for proof of QA and clash checks of CSD Models. CAD Services produced co-ordinated drawings for sign off by other trades, Single Service drawings, Schematics, Builders work drawings and finally As Built drawings once red pen mark-ups had been produced by MJL. The development of the 3D Model will be created utilising CAD Fabrication  MEP 2016.

PLOT C BBC TELEVISION CENTRE

  • Client: Imtech Engineering

  • Architect: Allford Hall Monaghan Morris 

  • Building Services Consultants: ARUP

  • Value to CAD SERVICES: £278,000

  • Fabrication CADmep 2017

Television Centre Development consisted of a number of new buildings set around the iconic listed building of the BBC. Plot C is a new Crescent shaped building made up of Basement Levels, Ground to Roof, Apartments and Penthouses with 47 individual types of apartments.

CAD Services brief was to provide a team leader dedicated to the project to oversee the production of models and drawings and act as the initial point of contact between ourselves and Imtech. Attended fortnightly design meetings and provided clash detection reports for proof of QA and clash checks of CSD Models. CAD Services produced co-ordinated drawings, Single Service drawings (at Construction stage), Schematics, Builders work drawings and finally As Built drawings. The development of the 3D Model created utilising Fabrication CADmep 2017.

WEMBLEY NW07/NW08

  • Client: Wates Construction

  • Architect: Flanagan Lawrence

  • Building Services Consultants: Desco

  • Value to CAD SERVICES: £238,000

  • Fabrication CADmep 2017

Wembley North West Village 07 & 08 comprising of 357 Apartments, approx 61 types, Ground and Lower Ground Plant and Car Parking Space . 

CAD Services brief was to provide a team leader dedicated to the project to oversee the production of models and drawings and act as the initial point of contact between ourselves and Wates. Attended weekly co-ordination meetings, provided clash detection reports for proof of QA and clash checks of CSD Models. CAD Services produced MEP co-ordinated drawings, Single Service drawings (at Construction stage), Schematics and Builders work drawings. 

BART'S SQUARE - PHASE 1

  • Client: SES Engineering

  • Architect: Sheppard Robson

  • Building Services Consultants: MTT

  • Value to CAD SERVICES: £333,000

  • Fabrication CADmep 2018

One Bartholomew Close Project consisted of Basement B1 & B2 Shell & Core High, Ground Floor Reception and Retail (retail by others) and Levels 1 to 11 CAT A Fit Out.

CAD Services provided a team leader dedicated to the project to oversee the production of models and drawings and act as the initial point of contact between ourselves and SRW.  Attended fortnightly design meetings and provided clash detection reports for proof of QA and clash checks of CSD Models. CAD Services produced co-ordinated drawings, Single Service drawings (at Construction stage), Schematics, Builders work drawings and finally As Built drawings once red pen mark-ups had been produced by SRW. The development of the 3D Model will be created utilising CAD Fabrication MEP 2016.